PrivaPark device guarantee and safety Priva Park is a hoop-shaped bar, a barrier for reserving and protecting private and disabled parking spaces
Priva Park: remote control parking lot bar for private parking space
Priva Park standard: protects and reserves your parking space remotely
Priva Park solar: autonomy, batteries charged via solar panel
Remote control parking lot bar for disabled parking space
Remote control parking lot barriers
Reservation of parking space PrivaPark
Parking lot barrier PrivaPark
Parking lot barriers PrivaPark
Reserved space on parking lot PrivaPark
Hinged parking lot bar PrivaPark
Security bar PrivaPark
Parking lot security system PrivaPark
Parking lot bar: mobile security companies, hospitals, supermarkets
Parking lot bar, private spaces, disabled spaces: contact PrivaPark

Click on the items below to view the detailed technical features.
	Base
	Cover
	Bar
	Specification of the electronics suitcase
	Temperatures
	Receiver
	Transmitter
	Logic control with a micro controller
	Electrical jack
	Gas safety jack for the ring in the high position

© 2st 2003-2006

BASE
	Sheet metal 3 mm thick
	Finishing black epoxy polyurethane painting, outside quality with waterproof varnish
	3 folds for the electronics suitcase situated in the middle of the base and destined to avoid the system
	Sizes on the floor : 495 X 460 mm
	1 fixation for the electric jack
	System for holding and guiding the bar
	4 inserts for fixing the cover (tabs)

COVER
	Sheet metal, 4 mm thick
	Bichromate electrochemical treatment
	Finishing : black painting, outside the quality with polyurethane process and waterproof varnish.
	Size : 515 X 460 mm
	Height : 85 mm
	The cover and the base can resist on a weight of 10 tons

BAR
	Diameter : 38 mm
	Thickness : 2 mm
	Outside sizes : 710 X 495 mm
	Bichromate electrochemical treatment
	Finishing : yellow epoxy painting outside the quality with polyurethane process and waterproof varnish
	Size between the ring in high position and the floor : 525 mm

SPECIFICATION OF THE ELECTRONIC SUITCASE

Batteries : sealed lead maintenance free waterproof batteries, without release of hydrogen during the utilisation and recharge of the batteries
	Quantity : 2
	Voltage : 12 Volts
	Intensity : 6,5 AH

Charger : switching mode 200 kHz
	End charge voltage : 14 volts
	Current charge : 600 ma
	Total time of batteries loading : 24 hours
	Curve of charge IU
	The full charge is signalled with a LED on the side of the suitcase. Electromagnetic and electronics Europeans standards

TEMPERATURES
	Operation: -20 °C to +45 °C
	Storage: -50 °C to + 50 °C

RECEIVER
	Super reaction type
	Frequency : 433,92 MHz
	Oscillator : ceramic resonator S/N for input signal of - 90 dBm = 16 dB
	Sensibility : -94 dBm
	Consumption : 0,650 ma
	European standard : I - ETS 300 220

TRANSMITTER
	Frequency : 433,92 Mhz
	Oscillator : ceramic resonator
	Power : 8 mw output
	Outside coding: of 11 bits so 2048 possibility
	Supply : battery type 23 A / 12 volts
	Signalling of the emission with a LED on the upper face of the remote control
	Other frequencies are available for foreign country (418 MHz et 315 MHz)
	European Telecom standard

LOGIC CONTROL WITH A MICRO CONTROLLER
	Low batteries voltage detection: 11 volts
	Flat batteries voltage detection : 10,5 volts
	Maximal intensity detection : 2 A
	Reception code control by pre starting
	Consumption without utilisation: < à 800 µA
	Consumption during operation : 3,6 ma
	All of the electronics components are in a waterproof box (IP 67).
	The software is protected and can not be crib
	Connection to the mains supply is via a captive cable mounted on the side of the case.
	The connection from the suitcase to the electrical jack is made with a waterproof plug (IP 67)

ELECTRICAL JACK
	Supply voltage : 12 volts
	Operation time 12 seconds
	Reduction by gears
	Driving by continuous screws
	Waterproof IP 67

GAS SAFETY JACK FOR THE RING IN HIGH POSITION
	Power : 1500 Newton
	Rod QPQ with an oil reserve (resists against the saline fogs)